ÆNIXPURE ONE
Autonomous commercial cleaning robot — four built-in functions.
Sweeping, scrubbing, vacuuming and dust removal for your retail, hotel and office spaces.
- Sweeping
- 1,400m²/h
- Min. runtime (sweeping / dust mopping)
- 10h
- Built-in functions
- 4
Highlights
A robot designed for daily commercial cleaning.
Consistent cleaning, fewer repetitive tasks and a complement to the teams already in place.
Four built-in functions
Sweeping, scrubbing, vacuuming and dust removal on a single machine, configured to suit the floor type.
Up to 1,400 m²/h
1,400 m²/h sweeping alone at 0.8 m/s, with combined throughput depending on the configuration chosen.
Automated docking station
Automatic charging, water and detergent handling, care of components — up to three days between routine attention.
Controlled noise level
Maximum noise level of 70 dB(A), suited to use in a busy commercial environment.
AI-assisted navigation
Precise edge cleaning, navigation in narrow spaces and dynamic obstacle avoidance.
ÆNIX monitoring & support
Centralised monitoring by the ÆNIX Robotics team, with remote assistance.
A free audit of your spaces
Our experts assess the coverage and automation potential of your site, with no commitment.
Functions
Four functions, combined to suit the floor.
Each function can be combined according to the floor type and the standard of cleanliness sought.
592mm
Sweeping
592 mm sweeping width, up to 1,400 m²/h at 0.8 m/s.
585mm
Scrubbing
585 mm scrubbing width, up to 1,300 m²/h combined with sweeping.
2 L / 8 L
Vacuuming
2 L dust bin and 8 L dust bag, debris up to 30 × 30 × 10 mm.
1 300m²/h
Dust removal
Dust mopping combined with sweeping, up to 1,300 m²/h.
Throughput
Throughput by configuration.
Throughput measured at 0.8 m/s in manufacturer test conditions. Actual performance varies with the environment and the operating mode.
*Figures from manufacturer testing in laboratory conditions. Actual performance may vary with the installation environment.
Operating runtime
3days
Up to three days between routine attention. The actual frequency varies with the cleaning mode, the workload and site conditions.
Docking station
A fully automated docking station.
Automatic charging
The robot returns to charge automatically between cleaning tasks.
Water and detergent handling
Clean water filling, dirty water emptying and automatic detergent dosing.
Care of components
Cleaning and drying the parts concerned to limit odours and keep components in good condition.
Platform
Centralised supervision, run by ÆNIX Robotics.
The fleet management platform is operated by the ÆNIX Robotics team to monitor your robots, site by site.
Task scheduling
Organising cleaning by site, zone and time slot.
Visibility over the fleet
Monitoring robot status and task progress.
Reports and operating information
History of interventions and performance indicators.
Alerts and remote assistance
Faster response to operational and maintenance needs.
Spec sheet
ÆNIX PURE ONE in detail.
Cleaning
- Functions
- Sweeping, scrubbing, vacuuming, dust removal
- Sweeping
- Up to 1,400 m²/h @ 0.8 m/s
- Sweeping + scrubbing
- Up to 1,300 m²/h @ 0.8 m/s
- Sweeping + dust mopping
- Up to 1,300 m²/h @ 0.8 m/s
- Sweeping + vacuuming
- Up to 1,100 m²/h @ 0.8 m/s
- Sweeping / scrubbing width
- 592 mm / 585 mm
- Clean / dirty water tank
- 14 L / 14 L
- Dust bin / dust bag
- 2 L / 8 L
- Maximum debris size
- 30 × 30 × 10 mm
- Maximum noise level
- ≤ 70 dB(A)
Runtime & charging
- Runtime — sweeping / dust mopping
- At least 10 h
- Runtime — scrubbing / vacuuming
- At least 3 h
- Charging time
- ≤ 2 h (10 to 90% charge)
- Battery
- 24 V, 42 Ah, LiFePO₄
Dimensions & mobility
- Dimensions (L × W × H)
- 682 × 592 × 685 mm*
- Net weight
- 60 kg
- Maximum cleaning speed
- 1.1 m/s
- Maximum gradient
- 12.5% (7.1°)
- Maximum obstacle height
- 20 mm
- Maximum gap width
- 35 mm
- Minimum clearance in a straight line
- 700 mm
- Docking station
- Automated charging, water and upkeep
*Dimensions including the side brushes. Figures from manufacturer testing in laboratory conditions. Actual performance may vary with the installation environment and the operating mode.
Use cases
Designed for commercial environments.
It can also be deployed in a shopping-centre type environment, with no specific performance demonstrated for that kind of site.
Our support
A turnkey deployment.
- 01
Audit of your spaces
Assessment of the coverage possible and of the areas suited to the robot.
- 02
Installation & set-up
Commissioning the robot and its docking station on site.
- 03
Team training
Getting to grips with the robot and with monitoring it.
- 04
Monitoring & support
Centralised monitoring by the ÆNIX Robotics team, with remote assistance.
What cleaning functions does the ÆNIX PURE ONE robot have?
The robot has four functions: sweeping, scrubbing, vacuuming and dust removal.
What is the cleaning throughput of the ÆNIX PURE ONE?
Up to 1,400 m²/h sweeping alone, 1,300 m²/h sweeping combined with scrubbing or dust mopping, and 1,100 m²/h sweeping combined with vacuuming, at a speed of 0.8 m/s.
Does the docking station need daily attention?
The automated docking station handles charging, water and detergent, which can stretch routine attention to as much as three days. The actual frequency varies with the cleaning mode, the workload and site conditions.
In what environments can the ÆNIX PURE ONE be deployed?
It is designed for shops and retail, hotels, senior living and offices.
Does the standard PURE ONE include an advertising screen?
No. The screen is offered on the ÆNIX PURE ONE Advertisingversion, presented separately.
Add-on available
Add an advertising screen to this robot
PURE ONE ADVERTISING is the range’s screen add-on: the same cleaning base, with an on-board screen managed remotely.
Take action
Ready to automate the cleaning of your spaces?
Free audit. Tailored assessment. Supported deployment. No commitment.
- Phone
- +33 5 33 04 12 27
- contact@aenix.fr
- Torn between two models?
- Open the configurator