Municipal stadiums
Municipal football pitches and surrounds: regular mowing, with an indicative throughput of about 2,000 m²/h in favourable conditions.
Commercial robotic mower for sports fields and large green areas — ÆNIX GREEN ONE
Autonomous mowing for sports fields and large green areas.
Automates part of the repetitive mowing passes, frees up time for your teams, zero direct emissions during operation and simple control from your smartphone.
RTK GNSS navigation, no boundary wireRTK base station includedÆNIX app and remote control
Free site auditthen an on-site demonstration
RTK accuracy ≈ 2 cmstated, no boundary wire
ÆNIX GREEN ONE
Autonomous mowing, no boundary wire.
RTK GNSS navigation, digital mapping and remote control: ÆNIX GREEN ONE automates part of the repetitive passes on compatible surfaces.
ÆNIX GREEN ONE in figures
- Indicative throughput
- ≈ 2,000m²/h
- Cutting width
- 79cm
- Stated RTK accuracy
- ≈ 2cm
- Direct emissions during operation
- 0
ÆNIX GREEN ONE offers an indicative throughput of about 2,000 m² per hour in favourable conditions, over a 79 cm width, with a stated RTK accuracy of about 2 cm and zero direct emissions during operation.
The challenge
Fields to maintain, teams short on time.
Municipal technical services, clubs and landscaping companies all face the same constraints. Recurring mowing of large areas absorbs hours that are needed elsewhere.
01
Not enough staff
Town hall technical services lack the manpower to keep up with the mowing schedule, especially in peak season.
02
Costly, noisy petrol mowers
Fuel, engine maintenance, noise and emissions: petrol mowing weighs on the budget and on the neighbourhood.
03
Inconsistent mowing
Depending on the team, the season and the weather, mowing passes slip and the finish varies from one field to the next.
04
Gruelling work
Mowing large areas, embankments or surrounds takes time and stamina, at the expense of other tasks.
ÆNIX GREEN ONE automates part of the repetitive mowing passes. Your teams gain time for the rest of the upkeep.
Implementation
From audit to autonomous mowing in 4 steps.
- 01
Audit and antenna set-up
An ÆNIX expert studies your field, its access points and constraints, then installs the RTK base station, included with the robot.
- 02
Mapping the field
The mowing perimeter and no-go zones are recorded with a stated accuracy of about 2 cm, with no boundary wire.
- 03
Scheduled autonomous mowing
Routes are planned automatically. The robot avoids obstacles, resumes from where it stopped after an interruption and returns to its charging station on its own.
- 04
Monitoring from the app
The ÆNIX app and the large-screen remote control operate the robot. Monitoring is remote over 4G, with alerts and notifications.
Benefits
Precise, continuous mowing you can control remotely.
Wire-free RTK autonomy
RTK GNSS positioning with a stated accuracy of about 2 cm: no boundary wire to bury or maintain. RTK base station included.
Automatic resume
After an interruption (battery, rain, obstacle), the robot resumes mowing from where it stopped.
Hot-swappable battery
Lithium iron phosphate (LFP) battery, 48 V – 48 Ah, up to 2 h of runtime per battery, replaceable so you can carry on without waiting for a recharge.
LiDAR obstacle avoidance
Dynamic obstacle avoidance using 3D LiDAR (depending on configuration), to work around field equipment and unexpected obstacles.
Automatic return to base
Depending on configuration, the charging station guides the robot back automatically, and it recharges without any intervention.
Remote control and alerts
ÆNIX app and large-screen remote control, 4G / Wi-Fi connectivity, remote monitoring and anti-theft alerts.
Use cases
From sports fields to large green spaces.
ÆNIX GREEN ONE is designed for open fields the robot can reach. Mowing takes place in an area closed to the public, with an emergency stop and obstacle avoidance. Every site is assessed and validated by ÆNIX before deployment.
Training grounds
Clubs and sports complexes: automates part of the repetitive mowing passes and frees up time for teams.
Golf clubs
Roughs, practice areas and compatible surrounds. ÆNIX GREEN ONE is not intended for golf greens.
Parks and green spaces
Local authorities and professional sites: large lawns, surrounds and open green spaces, hotels, campsites, industrial and logistics sites.
Learn more: Sports fields · Local authorities · Golf · Large professional areas
Please note: minimum cutting height of 2 cm. ÆNIX GREEN ONE is not intended for professional golf greens and is not positioned for elite professional sports pitches requiring extremely low mowing heights. Every site must be assessed and validated by ÆNIX before deployment.
Specifications
ÆNIX GREEN ONE specifications.
The robot’s stated specifications, grouped by theme, to check it suits your field.
- Indicative throughput
- ≈ 2,000m²/h
- Cutting width
- 79cm
- Weight
- 108kg
Cutting
- Cutting width
- 79 cm
- Cutting height
- Adjustable from 2 to 10 cm
- Blades
- 2 blades of 850 W, 3,000 rpm, floating deck
- Throughput
- About 2,000 m²/h in favourable conditions
Mobility
- Drive
- 4-wheel drive, 4 motors of 400 W, pivot turn on the spot
- Speed
- 0 to 6 km/h
- Maximum slope
- Up to 20° / 36%
Energy
- Battery
- Lithium iron phosphate (LFP) 48 V – 48 Ah, replaceable
- Runtime
- Up to 2 h per battery
- Charging time
- About 2.5 h
- Charging station
- Automatic return, depending on configuration
Navigation
- Positioning
- RTK GNSS, stated accuracy of about 2 cm, no boundary wire
- Base station
- RTK, included
- Planning
- Automatic routes, no-go zones, automatic resume from the stopping point
- Obstacle avoidance
- Dynamic avoidance using 3D LiDAR, depending on configuration
- Control
- ÆNIX mobile app and large-screen remote control
- Connectivity
- 4G / Wi-Fi, anti-theft alerts
Dimensions & protection
- Dimensions (L × W × H)
- 1,030 × 1,040 × 550 mm
- Weight
- 108 kg
- Ingress protection
- IP54
- Operating temperature
- 0 to 40 °C
- Emissions and noise
- Zero direct emissions during operation, low noise
CE conformity currently being validated by ÆNIX. Specifications are stated, non-contractual and subject to change. Indicative throughput measured in favourable conditions (flat ground, freshly mown grass). Every site must be assessed and validated by ÆNIX before deployment.
Support & service
From audit to maintenance, ÆNIX stays with you.
From first contact to maintenance, a single point of contact. Learn more about our support.
01
Free site audit
Analysis of your needs and recommendations. An ÆNIX expert assesses your site before any deployment.
Request a free site auditInstallation and mapping
Commissioning and set-up of your fields.
Team training
Easy hand-over and guidance.
Maintenance and support in France
Follow-up, assistance and spare parts.
Service contract
SÉRÉNITÉ
Maintenance designed around the mowing season.
Purchase or long-term rental options, following a tailored study.
Receive a tailored study- Support
- By phone and remotely
- Updates
- Included
- Visits
- 2 per year (spring and autumn)
- Winter storage
- Winter storage and recommissioning
- Blades
- Wear blades included
- Mapping
- Annual re-mapping
- Response time
- Within 72 working hours
Partner programme
Become an ÆNIX GREEN reseller partner.
Landscaping companies, cleaning firms and site maintenance providers: add autonomous mowing to your offer. You keep the client relationship, ÆNIX takes care of the technical side.
01
Study and demonstration
ÆNIX studies your client’s site and arranges a demonstration when the project allows.
02
Installation and training
Installation, mapping and team training are handled by ÆNIX.
03
Maintenance and support
Maintenance and support in France, for continuous service at your client’s site.
Commercial terms are shared once your partner profile has been qualified.
Become a partnerHow large an area can ÆNIX GREEN ONE mow?
Its indicative throughput is about 2,000 m² per hour in favourable conditions, with up to 2 hours of runtime per battery. The battery is replaceable and charging takes about 2.5 hours. The area actually mowed depends on the site, its terrain and the mowing strategy, defined during the site study.
What is the cutting height?
The cutting height is adjustable from 2 to 10 cm, with a 79 cm cutting width, 2 blades of 850 W at 3,000 rpm and a floating deck. The 2 cm minimum height is not suited to professional golf greens or to elite professional sports pitches requiring extremely low mowing heights.
Does ÆNIX GREEN ONE work in the rain?
The robot has an IP54 ingress protection rating and automatically resumes mowing from where it stopped after an interruption, for example because of rain. Operating conditions in poor weather are set out during the study of your field.
Is the public safe during mowing?
Mowing takes place in an area closed to the public. The robot has an emergency stop and dynamically avoids obstacles using its 3D LiDAR (depending on configuration). No-go zones can be defined during mapping. Every site is assessed and validated by ÆNIX before deployment. CE conformity currently being validated by ÆNIX.
What happens if it is stolen?
The robot is connected over 4G. It sends anti-theft alerts to the ÆNIX app and remains tracked remotely.
What maintenance should I plan for?
Blades are wear parts. The SÉRÉNITÉ service contract includes them, along with 2 visits per year (spring and autumn), updates and support by phone and remotely. Maintenance is carried out in France by ÆNIX.
How do I store the robot over winter?
The robot operates between 0 and 40 °C. The SÉRÉNITÉ service contract includes winter storage and recommissioning, as well as annual re-mapping.
Can I buy or rent ÆNIX GREEN ONE?
ÆNIX offers purchase or long-term rental options, following a tailored study. Request your free site audit to receive a proposal suited to your site.
Take action
Your field deserves autonomous mowing.
Free site audit, then an on-site demonstration when the project allows.
- Phone
- +33 5 33 04 12 27
- contact@aenix.fr
- Coverage
- Anywhere in France
CE conformity currently being validated by ÆNIX.