ÆNIXPURE SWEEP
Autonomous sweeping. At scale.
Designed for large industrial and logistics floors, ÆNIX PURE SWEEP handles the autonomous sweeping of dust and debris. It plans its routes methodically, returns automatically to its station when its charge requires it, then resumes its cycle to keep professional spaces regularly maintained.
- Maximum throughput
- 1,000m²/h
- Sweeping width
- 890mm
- Operating runtime
- 9–10h
- Hopper capacity
- 30L
How it works
Performance built for large floors.
PURE SWEEP focuses its technology on one essential job: keeping large floors clean over time through autonomous, regular and effective sweeping.
Autonomous navigation
Autonomous navigation and real-time obstacle detection, including in cluttered or busy environments.
Automatic charging
At the end of its cycle, or when its charge requires it, PURE SWEEP returns automatically to its charging station.
890mm
890 mm sweeping width
A single pass covers a standard aisle width, for throughput of up to 1,000 m²/h.
30L
30 L hopper
High collection capacity to limit emptying on long cycles, in warehouses as in workshops.
Remote management and monitoring
Scheduling cycles, monitoring the robot’s status and reviewing its activity from a dedicated management interface.
≈ 30min
Fast deployment
Initial site mapping in about 30 minutes by laser navigation, and commissioning without major alterations.
Note: ÆNIX PURE SWEEP is a dry sweeping robot — it does not wash and does not vacuum. For wet cleaning or combined vacuuming, see ÆNIX PURE ONE or ÆNIX PURE ONE LITE in the PURE range.
Large-area runtime
Service continuity designed for large floors.
PURE SWEEP plans its sweeping routes methodically and returns automatically to its station when its charge requires it. Once charged, it can resume its cycle to keep professional spaces regularly maintained.
- Operating runtime
- 9 to 10 h
- Charging time
- 4 to 5 h
- Automatic charging
- With the cycle resumed
In detail
Built to last, designed for the field.
Spec sheet
ÆNIX PURE SWEEP specifications.
All the robot’s confirmed specifications, to check that it suits your environment.
- Max. throughput
- 1,000m²/h
- Runtime
- 9–10h
- Weight
- 40kg
Dimensions & weight
- Weight
- 40 kg
- Sweeping width
- 890 mm
- Hopper capacity
- 30 L
Performance
- Maximum throughput
- up to 1,000 m²/h
- Type of cleaning
- Dry sweeping
- Operating runtime
- 9 to 10 hours per charge
- Charging time
- 4 to 5 hours
Power & charging
- Battery
- 38.4 V / 25 Ah LiFePO4
- Power
- 100 W
- Return to station
- Automatic, with the cycle resumed
Navigation & management
- Navigation
- Laser SLAM, real-time obstacle detection
- Mapping
- Custom cleaning zones, virtual walls
- Management
- Monitoring and remote control through the management interface
- Target environment
- Warehouses, workshops, logistics areas
Estimate
And at your site?
Enter the area to be swept to see the order of magnitude of a PURE SWEEP pass.
Estimated time for one pass
4h
The pass fits within a single charge.
- Theoretical sweeping distance
- 4.5 km
- Returns to station during the pass
- None
- Area swept per week
- 20,000 m²
An indicative estimate, based on the stated maximum throughput (1,000 m²/h, 890 mm width) and a runtime of 9 h per charge. Actual throughput depends on clutter, soiling levels and the traffic plan: it is confirmed during the on-site audit.
Use cases
Where ÆNIX PURE SWEEP makes a difference.
-
01Warehouses & logistics centres
Circulation aisles kept clear continuously, without interrupting picking flows.
-
02Production workshops
Less dust and residue on the floor around production lines.
-
03Covered car parks & technical areas
Extensive, lightly used floors, well suited to recurring automated sweeping.
Which environments is PURE SWEEP intended for?
ÆNIX PURE SWEEP is designed for large professional floors with little furniture: warehouses, production workshops, logistics centres and covered car parks. It is a dry sweeping robot; for wet cleaning or combined vacuuming, the PURE range offers other models.
What is its sweeping capacity?
The robot sweeps over a width of 890 mm, for maximum throughput of up to 1,000 m²/h and a 30 L collection capacity.
Does the robot return to its station automatically?
Yes. When its charge requires it, PURE SWEEP returns automatically to its charging station, then can resume its sweeping cycle where it left off.
Can it be monitored and controlled remotely?
Yes. Monitoring and remote control are handled through the management interface, with custom cleaning zones and virtual walls.
How do I arrange an on-site demonstration?
A demonstration or a free audit of your floors can be arranged directly with the ÆNIX Robotics team, with no commitment. Request a demonstration →
PURE range
Need more thorough cleaning?
ÆNIX PURE SWEEP is part of a range of cleaning robots. Each model answers a specific need.
Take action
See ÆNIX PURE SWEEP at your site?
Free audit of your floors. On-site demonstration. No commitment.
- Phone
- +33 5 33 04 12 27
- contact@aenix.fr
- Torn between two models?
- Open the configurator