PURE range
Robots for offices, retail spaces and industrial sites.
Find my robot The full PURE range Compare the models
PURE NANOCompact, 3-in-1
PURE ONEVersatile, four functions
PURE ONE LITE3-in-1, wet washing
PURE QUIET5-in-1, noise-sensitive spaces
PURE ONE ADVERTISINGScreen add-on
PURE SWEEPLarge-area sweeping
GREEN ONEAutonomous mowing, sports fields
Sports fieldsAutonomous mowing, clubs and councils
Local authoritiesParks and green spaces
GolfRoughs and practice areas
Large professional areasHotels, campsites, industrial sites
Solutions
Five families of robotic solutions. The cleaning and outdoor mowing ranges are presented today.
All solutions Find my robotIndustries
Pages devoted to the constraints of each sector and to the solutions available.
All industries
Hotels & hospitalityCleaning, delivery, service
Healthcare & care homesCommon areas, internal transport
Warehousing & logisticsSweeping large areas
Retail & supermarketsSweeping, cleaning, communication
Food processingZones, flows, packing
Manufacturing & logisticsWorkshops, internal flows
Cleaning contractorsAutomating part of a cleaning contract
OfficesCorridors, meeting rooms, schedules
Schools & public buildingsTimetable, zones, teams
Gyms & sports facilitiesReception, floor coverings, time slots
Covered car parksDry sweeping of clear areas
Outdoor industries · ÆNIX GREEN
Full GREEN rangeSweeping wide aisles, keeping floors maintained, cleaning defined zones: ÆNIX Robotics assesses your logistics site and deploys autonomous cleaning robots suited to your flows, your floors and your hours.
The reality on the ground
In a warehouse, floor care is a long, repetitive job that is hard to fit between two flows.
This page covers floor care in warehouses and logistics platforms. For production workshops and internal transport, see Manufacturing & logistics.
Long aisles, storage areas, docks: thousands of square metres to go over, zone after zone.
Film, cardboard, splinters from pallets: the floor gets dirty at the pace of the flows and has to be gone over often.
Every cleaning pass ties up operators already busy with receiving, picking and dispatch.
Forklifts, pedestrians, shift patterns: upkeep has to be organised without interrupting operations.
Automating without stopping work
Automation does not replace your teams: it takes on certain repetitive tasks suited to it, so that everyone can focus on the work that needs their skill.
The scope given to the robot is defined during your site assessment.
Solutions
Every machine is chosen after your site has been assessed. Here are the ÆNIX solutions for logistics environments.
Autonomous sweeping of large floors.
Designed for large industrial and logistics floors, PURE SWEEP handles the dry sweeping of dust and debris in your aisles.
Specifications
* Depending on operating conditions: clutter, soiling levels, traffic plan.
Multi-function cleaning.
When sweeping is not enough: sweeping, scrubbing, vacuuming and dust handling on a single machine.
Specifications
* Stated values, depending on operating conditions.
Industrial transport.
A transport solution for industrial environments, currently being added to the ÆNIX catalogue.
Specifications
Internal flows & handling
ÆNIX also assesses projects to automate internal flows and handling.
Sharing the space
A useful robot is a well-integrated robot. Before any deployment, ÆNIX assesses the reality of your site.
This assessment determines the solution, the working zones and the operating windows.
The ÆNIX method
ÆNIX Robotics integrates the solution at your site and remains your point of contact at every stage.
Floor areas, floors, clearances, flows and hours: we identify the tasks genuinely suited to automation.
The starting point of every projectDepending on your site and the solution considered, a demonstration or trial can be arranged to confirm the value in real conditions.
Subject to site eligibility and availabilityCommissioning, definition of zones, routes and no-go areas, operating windows aligned with your operations.
Set-up specific to your siteHandover to your teams, then follow-up by the ÆNIX technical team and maintenance according to the offer chosen.
According to the offer chosenAutomation potential
No payback is stated without data: the potential is measured at your site, from your actual operations.
A first order of magnitude for sweeping: the PURE SWEEP estimatorResult
A recommendation based on your site’s data, not on an average.
Purchase & financing: depending on your project, different purchase or financing arrangements can be explored with you. Discuss it with an expert
It depends on the floor area, the type of soiling and the standard expected. For dry sweeping of wide aisles, ÆNIX PURE SWEEP offers an 890 mm sweeping width and a 30 L hopper. Where the floor also calls for scrubbing, vacuuming or dust handling, ÆNIX PURE ONE combines those functions. The choice is confirmed after your site has been assessed.
It depends on how your site is run and is prepared beforehand: the assessment defines the zones, the time slots and the no-go areas, taking account of how teams and vehicles move. Depending on the case, cleaning is scheduled during activity or outside peak flows.
The stated throughputs are maximums: up to 1,000 m²/h for ÆNIX PURE SWEEP, and up to 1,400 m²/h sweeping at 0.8 m/s for ÆNIX PURE ONE. The area actually covered depends on clutter, soiling levels, the traffic plan and the operating windows: it is assessed during your site assessment. For a first order of magnitude, use the PURE SWEEP estimator.
Where possible, a demonstration or an on-site trial can be arranged, subject to the site’s eligibility and the availability of the solution. Tell us about your project to look at the terms.
ÆNIX PURE SWEEP is designed for large industrial and logistics floors. Whether it suits your floor still depends on its condition and layout (joints, cracks, thresholds, slopes, covering): that is one of the points checked during the site analysis, before any recommendation.
The project follows four stages: site analysis, demonstration or trial where possible, deployment and set-up (zones, routes, no-go areas, operating windows), then training for your teams and support according to the offer chosen.
The assessment can cover several needs: sweeping wide aisles, more thorough upkeep of certain zones with a multi-function machine, internal flows and handling, which ÆNIX assesses case by case. The combination of solutions is set according to your floor areas and your organisation.
The cost depends on the machine chosen, its configuration, the deployment at your site and the associated services (training, support, maintenance), as well as on how it is acquired or financed. ÆNIX draws up a proposal after assessing your needs. Request a quote
Site assessment
Tell us about your site: we assess the solution that suits your reality, not an average.
